|
DESCRIPTION
The Industraline Model BM-40 (Belt Module Conveyor) handles a
wide variety of captive assembly skids, fixtures and pallets. A number
of pre-engineered widths are available for 18" to 61" in
1" increments to meet any assembly or transport application. Model
BM-40 is ideally suited for Synchronous, Non-Synchronous Assembly and
Transport Operation. The open center and modular construction allows for
a variety of bolt-on accessories and add-on automation components to
enhance your assembly line performance. Reference our Engineering and
Accessories Sections to select the items that are best suited for your
application, such as Cushioned Stoppers, Pushers, Diverters, Lift and
Rotate or Precision Positioning Devices.
SPECIFICATIONS
FRAME: Medium duty aluminum frames at a
weight of 4 lbs per foot per side. Structural grade alloy temper of
6063T6 and clear coat anodized architectural finish. 7 GA.
bolted cross members. Longitudinal bolt slots on all sides for
6mm and 8mm diameter bolts to mount accessories and support
components. Enclosed belt return path Steel side
guide. Engineered plastic rollers for long wear life and reduced
coefficient of friction between base chain and support rail.
Enclosed chain return path.
BEARINGS: All bearings are precision heavy duty,
lubricated for life, ball bearing units with cast iron housings.
DRIVE SHAFT: 25mm diameter located at the discharge end
of unit
MOTOR DRIVE: 1/3 HP, 60cycle TEFC right angle
gear motor available in all voltages (note: maximum load for 1/3 HP
unit is 210 lbs., center mounted if possible.)
ACCUMULATION ZONES: Available in any required
length from single operator stations to multi-job zones.
SPEED: 45 FPM, constant.
INTERMEDIATE SECTIONS: Available in lengths
from 2'-0" min. to 20'-0" max. (please reference Engineering
Section for Limitations or Space Requirements).
FLOOR SUPPORTS: Adjustable type supports are
available from 12" to 42" top of wheel (T.O.W.) with
adjustment of + or - 1".
CAPACITY: 150 lbs. per foot dead load, 250 lbs.
effective belt pull.
BELTS: 40 mm pre-stretched endless belts.
FEATURES
-
Widths pre-engineered from 18" to 61".
-
Precision stopping.
-
Complete robotics interface capacity.
-
Bolt-up modular construction.
-
UHMW clip-on side guide
-
Lengths: Reference Engineering Section for details
-
Synchronous, Non-Synchronous Free Flow Accumulation
-
Smooth re-start
-
Safe, quiet, economic design.
-
45 FPM standard w/ optional fixed speeds from 5-120
FPM.
-
Shaft mounted drive(s).
OPTIONAL EQUIPMENT
ZONES: Zones are available with
one (1) work zone and one (1) staging zone or one (1) work zone and
two (2) staging zones ( one (1) each end of working zone)>
DRIVES: Inverter drives for low to high
transfer speeds.
ELECTRICAL CONTROLS: Available as an option
MOTORS: Available through 3/4 HP in all NEMA
classes.
SPEEDS: 5-120 FPM, constant speed (specify)
Note: HP capacity changes with speed (please reference engineering
section).
SUPPORTS: Multi-tier floor supporting or
ceiling support header channel.
ACCESSORY COMPONENTS: Reference Accessory and
Component Sections for such items as Stoppers, Diverters, Positioners,
Positive Drive Wheels, Lock Devices, Pallet Exciters, Etc...
PRE-ENGINEERED WIDTHS
| EVEN WIDTH FIXTURES |
ODD WIDTH FIXTURES |
| Width |
BF |
Width |
BF |
Width |
BF |
Width |
BF |
Width |
BF |
Width |
BF |
| -- |
-- |
30" |
23-1/8" |
46" |
39-1/8" |
-- |
-- |
31" |
24-1/8" |
47" |
40-1/8" |
| -- |
-- |
32" |
25-1/8" |
48" |
41-1/8" |
-- |
-- |
33" |
26-1/8" |
49" |
42-1/8" |
| 18" |
11-1/8" |
34" |
27-1/8" |
50" |
43-1/8" |
19" |
12-1/8" |
35" |
28-1/8" |
51" |
44-1/8" |
| 20" |
13-1/8" |
36" |
29-1/8" |
52" |
45-1/8" |
21" |
14-1/8" |
37" |
30-1/8" |
53" |
46-1/8" |
| 22" |
15-1/8" |
38" |
31-1/8" |
54" |
47-1/8" |
23" |
16-1/8" |
39" |
32-1/8" |
55" |
48-1/8" |
| 24" |
17-1/8" |
40" |
33-1/8" |
56" |
49-1/8" |
25" |
18-1/8" |
41" |
34-1/8" |
57" |
50-1/8" |
| 26" |
19-1/8" |
42" |
35-1/8" |
58" |
51-1/8" |
27" |
20-1/8" |
43" |
36-1/8" |
59" |
52-1/8" |
| 28" |
21-1/8" |
44" |
37-1/8" |
60" |
53-1/8" |
29" |
22-1/8" |
45" |
38-1/8" |
61" |
54-1/8" |
Note: Non-standard widths available upon
request.
HOW TO SPECIFY
| Qty. |
Model |
BF |
Length |
Speed |
T.O.W. |
H.P. |
Volts |
Phase |
| |
|
|
|
|
Elev.
|
|
|
|
| |
BM-40 |
|
|
|
|
|
|
|
Click for Printer Friendly
Version |
