The Industraline Model DC-2060 Transport Conveyor
handles a wide variety of captive assembly skids, fixtures and pallets.
A number of pre-engineered widths are available for 14" to 61"
in 1" increments to meet any assembly or transport application.
Model DC-2060 is ideally suited for Synchronous and Transport Operation.
The open center and modular construction allows for a variety of bolt-on
accessories and add-on automation components to enhance your assembly
line performance. Reference our Engineering and Accessories Sections to
select the items that are best suited for your application.
FRAME: Medium duty aluminum frames at a weight
of 9 lbs per foot per side. Structural grade alloy temper of 6063T6
and clear coat anodized architectural finish. Longitudinal tee-bolt
slots on all sides for 3/8" diameter hex or square head bolts to
mount accessories and support components. Clip-on UHMW side guide for
reduced friction and noise. 1.7" diameter passage, used as an
optional air manifold to supply accessory components and operator
tooling requirements. Engineered plastic chain guide for long wear
life and reduced coefficient of friction between base chain and
support rail. Enclosed chain return path. 7 GA. bolted cross members.
BEARINGS: All bearings are precision heavy
duty, lubricated for life, ball bearing units with cast iron housings.
DRIVE SHAFT: 1 15/16" diameter located at
the discharge end of unit
MOTOR DRIVE: 1/3 HP, 60cycle TEFC
right angle gear motor available in all voltages (note: maximum load
for 1/3 HP unit is 210 lbs., center mounted if possible.)
SPEED: 45 FPM, constant
INTERMEDIATE SECTIONS: Available in
lengths from 2'-0" min. to 12'-0" max. (please reference
Engineering Section for Limitations or Space Requirements).
FLOOR SUPPORTS: Adjustable type
supports are available from 12" to 42" top of wheel (T.O.W.)
with adjustment of + or - 1".
END TAKE-UP: Manual screw type,
separate for each side.
CHAIN: 2060 Double Pitch Roller chain
w/ straight side plates. 1500 lbs. per foot dead load, 2400 lbs.
effective chain pull.
CHAIN: Stainless Steel Chain
MOTORS: Available through 5 HP in all NEMA classes.
DRIVES: Center Drive w/ Center Take-Up & Fixed
End Idlers.
ELECTRICAL CONTROLS: Available as an option
SPEEDS:5-120 FPM, constant speed (specify) Note: HP
capacity changes with speed (please reference engineering section).
SUPPORTS: Multi-tier floor supporting or ceiling
support header channel.
ACCESSORY COMPONENTS: Reference Accessory and
Component Sections for such items as Stoppers, Diverters, Etc,...
