|
DESCRIPTION
The Industraline Model DPB-150L Diverter handles a wide
variety of captive skids, fixtures and pallets. A number of
pre-engineered widths are available from 18" to 61" in 1"
increments to meet any transfer application.
SPECIFICATIONS
FRAME: Medium duty aluminum frames at a
weight of 4 lbs. per foot per side. Structural grade alloy temper of
6063T6 and clear coat anodized architectural finish.
Longitudinal bolt slots on all sides for 6mm and to mount accessories
and support components. Enclosed belt return path.
Enclosed plastic rollers for long wear life and reduced coefficient of
friction.
BEARINGS: All bearings are precision heavy
duty, lubricated for life, ball bearing units with cast iron housings.
LIFT DEVICE: Industraline Positive lift
Cylinders with 100mm bore x 50mm stroke. 765 lbs. lift capacity at 80
PSI. Furnished with double solenoid valve and flow control.
MOTOR DRIVE: 1/3 HP, 60cycle TEFC right angle
gear motor, available in all voltages. (note: maximum belt pull for
1/3 HP unit is 210 lbs.)
CAPACITY: 150 lbs. per foot dead load, 250 lbs
effective belt pull.
BELTS: 50 mm pre-stretched endless belts.
SPEED: 45 FPM, constant.
DRIVE SHAFT: 25mm diameter, located at the
discharge end.
SENSOR: Sensor to read diverter up, with down
sensor optional.
HOW TO SPECIFY
NOTES
-
Transition should not exceed 1.3 of conveyed object
width.
-
Pinch point exist at diverters.
-
Reference Engineering Section for conveyor frame
widths.
-
Reference Conveyor model for BF dimension.
| Qty. |
Model |
BF |
Length |
Speed |
Voltage |
Phase |
Sensor |
Conveyor |
| |
|
|
|
|
|
|
UP |
DN |
Model |
| |
DPB-150L |
|
|
|
|
|
|
|
Click for Printer Friendly Version |
