|
DESCRIPTION
The Industraline Model DPR-270L Chain Driven Wheel
Diverter handles a wide variety of captive skids, fixtures and pallets.
A number of pre-engineered widths are available from 18" to
61" in 1" increments to meet any transfer application. The
DPR-270L diverter is mounted to the bottom side of Industraline Model
conveyors for precision placement along conveyor. Model DPR-270L is best
suited for Conveyor Models NSFW-40 and CDW-40.
SPECIFICATIONS
FRAME: 7 GA. steel.
LIFT DEVICE: Industraline Positive-Lift Air
Cylinder with 100mm bore x 50mm stroke. 740 lbs. lift capacity at 80
PSI. Furnished with double solenoid valve and flow control.
WHEEL: 2.7" DIA. Positive Drive Wheels with 4"
nominal centers at 500 lbs. capacity each
MOTOR DRIVE: 1/3 HP, 60 cycle TEFC right angle gear
motor available in all voltages (note: maximum chain pull for 1/3 HP
unit is 210 lbs.
SENSORS: Sensor to read diverter up, with down
sensor optional.
STOPPER: Reference Stopper Section for
selection.
HOW TO SPECIFY
NOTES
-
Transition should not exceed 1.3 of conveyed object
width.
-
Pinch point exist at diverters.
-
Reference Engineering Section for conveyor frame
widths.
-
Reference Conveyor model for BF dimension.
| Qty. |
Model |
BF |
Length |
Speed |
Voltage |
Phase |
Sensor |
Conveyor |
| |
|
|
|
|
|
|
UP |
DN |
Model |
| |
DPR-270L
|
|
|
|
|
|
|
|
|
