|
DESCRIPTION
The Industraline Model HDDC-2050 Transport Conveyor
handles a wide variety of captive assembly skids, fixtures and pallets.
A number of pre-engineered widths are available for 14" to 61"
in 1" increments to meet any assembly or transport application.
Model HDDC-2050 is ideally suited for Synchronous and Transport
Operation. The open center and modular construction allows for a variety
of bolt-on accessories and add-on automation components to enhance your
assembly line performance. Reference our Engineering and Accessories
Sections to select the items that are best suited for your application.
SPECIFICATIONS
FRAME: Medium duty aluminum frames at a
weight of 12 lbs per foot per side. Structural grade alloy temper of
6063T6 and clear coat anodized architectural finish.
Longitudinal tee-bolt slots on all sides for 3/8" diameter hex or
square head bolts to mount accessories and support components.
Clip-on UHMW side guide for reduced friction and noise.
1.7" diameter passage, used as an optional air manifold to supply
accessory components and operator tooling requirements.
Engineered plastic chain guide for long wear life and reduced
coefficient of friction between base chain and support rail.
Enclosed chain return path. 7 GA. bolted cross members.
BEARINGS: All bearings are precision heavy duty,
lubricated for life, ball bearing units with cast iron housings.
DRIVE SHAFT: 1 15/16" diameter located at the
discharge end of unit
MOTOR DRIVE: 1/3 HP, 60cycle TEFC right angle
gear motor available in all voltages (note: maximum load for 1/3 HP
unit is 210 lbs., center mounted if possible.)
SPEED: 45 FPM, constant
INTERMEDIATE SECTIONS: Available in lengths
from 2'-0" min. to 12'-0" max. (please reference Engineering
Section for Limitations or Space Requirements).
FLOOR SUPPORTS: Adjustable type supports are
available from 12" to 42" top of wheel (T.O.W.) with
adjustment of + or - 1".
END TAKE-UP: Manual screw type, separate for
each side.
CHAIN: 2050 Double Pitch Roller chain w/
straight side plates 800 lbs. per foot dead load, 1700 lbs.
effective chain pull.
FEATURES
-
Widths pre-engineered from 14" to 61".
-
Individual screw take-up on each side.
-
Precision stopping
-
Bolt-up modular construction.
-
Driver chain #50 Riveted Roller chain.
-
Replaceable UHMW clip-on side guide
-
Lengths: Reference Engineering Section for details
-
Synchronous Operation
-
Smooth re-start
-
Safe, quiet, economic design.
-
UHMW chain guide for quite equipment operation.
-
45 FPM standard w/ optional fixed speeds from 5-120
FPM.
OPTIONAL EQUIPMENT
CHAIN: Stainless Steel Chain
MOTORS: Available through 5 HP in all NEMA
classes.
DRIVES: Center Drive w/ Center Take-Up &
Fixed End Idlers.
ELECTRICAL CONTROLS: Available as an option
SPEEDS: 5-120 FPM, constant speed (specify)
Note: HP capacity changes with speed (please reference engineering
section).
SUPPORTS: Multi-tier floor supporting or
ceiling support header channel.
ACCESSORY COMPONENTS: Reference Accessory and
Component Sections for such items as Stoppers, Diverters, Etc,...
PRE-ENGINEERED WIDTHS
| EVEN WIDTH FIXTURES |
ODD WIDTH FIXTURES |
| Width |
BF |
Width |
BF |
Width |
BF |
Width |
BF |
Width |
BF |
Width |
BF |
| 14" |
8-1/8" |
30" |
24-1/8" |
46" |
40-1/8" |
15" |
9-1/8" |
31" |
25-1/8" |
47" |
41-1/8" |
| 16" |
10-1/8" |
32" |
26-1/8" |
48" |
42-1/8" |
17" |
11-1/8" |
33" |
27-1/8" |
49" |
43-1/8" |
| 18" |
12-1/8" |
34" |
28-1/8" |
50" |
44-1/8" |
19" |
13-1/8" |
35" |
29-1/8" |
51" |
45-1/8" |
| 20" |
14-1/8" |
36" |
30-1/8" |
52" |
46-1/8" |
21" |
15-1/8" |
37" |
31-1/8" |
53" |
47-1/8" |
| 22" |
16-1/8" |
38" |
32-1/8" |
54" |
48-1/8" |
23" |
17-1/8" |
39" |
33-1/8" |
55" |
49-1/8" |
| 24" |
18-1/8" |
40" |
34-1/8" |
56" |
50-1/8" |
25" |
19-1/8" |
41" |
35-1/8" |
57" |
51-1/8" |
| 26" |
20-1/8" |
42" |
36-1/8" |
58" |
52-1/8" |
27" |
21-1/8" |
43" |
37-1/8" |
59" |
53-1/8" |
| 28" |
22-1/8" |
44" |
38-1/8" |
60" |
54-1/8" |
29" |
23-1/8" |
45" |
33-1/8" |
61" |
55-1/8" |
Note: Non-standard widths available upon
request.
HOW TO SPECIFY
| Qty. |
Model |
BF |
Length |
Speed |
T.O.W. |
H.P. |
Volts |
Phase |
| |
|
|
|
|
Elev.
|
|
|
|
| |
HDDC-2050
|
|
|
|
|
|
|
|
|
