|
DESCRIPTION
The Industraline Model HDDC-2060 Transport Conveyor
handles a wide variety of captive assembly skids, fixtures and pallets.
A number of pre-engineered widths are available for 14" to 61"
in 1" increments to meet any assembly or transport application.
Model HDDC-2060 is ideally suited for Synchronous and Transport
Operation. The open center and modular construction allows for a variety
of bolt-on accessories and add-on automation components to enhance your
assembly line performance. Reference our Engineering and Accessories
Sections to select the items that are best suited for your application.
SPECIFICATIONS
FRAME: Heavy duty aluminum frames at a
weight of 12 lbs per foot per side. Structural grade alloy temper of
6063T6 and clear coat anodized architectural finish. Longitudinal
tee-bolt slots on all sides for 3/8" diameter hex or square head
bolts to mount accessories and support components. Clip-on UHMW
side guide for reduced friction and noise. 1.7" diameter
passage, used as an optional air manifold to supply accessory components
and operator tooling requirements. Engineered plastic chain guide
for long wear life and reduced coefficient of friction between base
chain and support rail. Enclosed chain return path. 7 GA. bolted
cross members.
BEARINGS: All bearings are precision heavy duty, lubricated
for life, ball bearing units with cast iron housings.
DRIVE SHAFT: 1 15/16" diameter located at the
discharge end of unit
MOTOR DRIVE: 1/3 HP, 60cycle TEFC right angle
gear motor available in all voltages (note: maximum load for 1/3 HP unit
is 210 lbs., center mounted if possible.)
SPEED: 45 FPM, constant
INTERMEDIATE SECTIONS: Available in lengths from
2'-0" min. to 12'-0" max. (please reference Engineering
Section for Limitations or Space Requirements).
FLOOR SUPPORTS: Adjustable type supports are
available from 12" to 42" top of wheel (T.O.W.) with
adjustment of + or - 1".
END TAKE-UP: Manual screw type, separate for each
side.
CHAIN: 2060 Double Pitch Roller chain w/ straight
side plates. 1050 lbs. per foot dead load, 2400 lbs. effective
chain pull.
FEATURES
-
Widths pre-engineered from 14" to 61".
-
Individual screw take-up on each side.
-
Precision stopping
-
Bolt-up modular construction.
-
Driver chain #50 Riveted Roller chain.
-
UHMW clip-on side guide
-
Lengths: Reference Engineering Section for details
-
Synchronous Operation
-
Smooth re-start
-
Safe, quiet, economic design.
-
UHMW chain guide for quite equipment operation.
-
45 FPM standard w/ optional fixed speeds from 5-120
FPM.
OPTIONAL EQUIPMENT
CHAIN: Stainless Steel Chain
MOTORS: Available through 5 HP in all NEMA
classes.
DRIVES: Center Drive w/ Center Take-Up &
Fixed End Idlers.
ELECTRICAL CONTROLS: Available as an option
SPEEDS: 5-120 FPM, constant speed (specify) Note:
HP capacity changes with speed (please reference engineering section).
SUPPORTS: Multi-tier floor supporting or ceiling
support header channel.
ACCESSORY COMPONENTS: Reference Accessory and
Component Sections for such items as Stoppers, Diverters, Etc...
PRE-ENGINEERED WIDTH
| EVEN WIDTH FIXTURES |
ODD WIDTH FIXTURES |
| Width |
BF |
Width |
BF |
Width |
BF |
Width |
BF |
Width |
BF |
Width |
BF |
| 14" |
8-1/8" |
30" |
24-1/8" |
46" |
40-1/8" |
15" |
9-1/8" |
31" |
25-1/8" |
47" |
41-1/8" |
| 16" |
10-1/8" |
32" |
26-1/8" |
48" |
42-1/8" |
17" |
11-1/8" |
33" |
27-1/8" |
49" |
43-1/8" |
| 18" |
12-1/8" |
34" |
28-1/8" |
50" |
44-1/8" |
19" |
13-1/8" |
35" |
29-1/8" |
51" |
45-1/8" |
| 20" |
14-1/8" |
36" |
30-1/8" |
52" |
46-1/8" |
21" |
15-1/8" |
37" |
31-1/8" |
53" |
47-1/8" |
| 22" |
16-1/8" |
38" |
32-1/8" |
54" |
48-1/8" |
23" |
17-1/8" |
39" |
33-1/8" |
55" |
49-1/8" |
| 24" |
18-1/8" |
40" |
34-1/8" |
56" |
50-1/8" |
25" |
19-1/8" |
41" |
35-1/8" |
57" |
51-1/8" |
| 26" |
20-1/8" |
42" |
36-1/8" |
58" |
52-1/8" |
27" |
21-1/8" |
43" |
37-1/8" |
59" |
53-1/8" |
| 28" |
22-1/8" |
44" |
38-1/8" |
60" |
54-1/8" |
29" |
23-1/8" |
45" |
33-1/8" |
61" |
55-1/8" |
Note: Non-standard widths available upon request.
HOW TO SPECIFY
| Qty. |
Model |
BF |
Length |
Speed |
T.O.W. |
H.P. |
Volts |
Phase |
| |
|
|
|
|
Elev.
|
|
|
|
| |
HDDC-2060
|
|
|
|
|
|
|
|
Click for Printer Friendly Format |
