FRAME: Medium duty aluminum frames at a weight of 6.67 lbs per
foot per side. Structural grade alloy temper of 6063T6 and clear coat
anodized architectural finish. 7 GA. bolted cross members.
Longitudinal tee-bolt slots on all sides for 3/8" diameter hex or
square head bolts to mount accessories and support components. Clip-on
UHMW side guide for reduced friction and noise 1.7" diameter
passage, used as an optional air manifold to supply accessory
components and operator tolling requirements. Engineered plastic chain
guide for long wear life and reduced coefficient of friction between
base chain and support rail. Enclosed chain return path.
BEARINGS: All bearings are precision heavy
duty, lubricated for life, ball bearing units with cast iron housings.
DRIVE SHAFT: 1 15/16" diameter located at
the discharge end of unit
MOTOR DRIVE: 1/3 HP, 60cycle TEFC
right angle gear motor available in all voltages (note: maximum load
for 1/3 HP unit is 210 lbs., center mounted if possible.)
ACCUMULATION ZONES: Available in any
required length from single operator stations to multi-job zones.
SPEED: 45 FPM, constant.
INTERMEDIATE SECTIONS: Available in
lengths from 2'-0" min. to 12'-0" max. (please reference
Engineering Section for Limitations or Space Requirements).
FLOOR SUPPORTS: Adjustable type
supports are available from 12" to 42" top of wheel (T.O.W.)
with adjustment of + or - 1".
END TAKE-UP: Manual screw type,
separate for each side.
CHAIN: 2062 Triple Plus chain with 1
7/16" DIA engineered plastic rollers on 1 1/2" centers. 540
lbs. per foot dead load, 920 lbs. effective chain pull.
-
Widths pre-engineered from 14" to 61".
-
Individual screw take-up on each side.
-
Precision stopping.
-
Complete robotics interface capacity.
-
Bolt-up modular construction.
-
Driver chain #50 Riveted Roller chain.
-
UHMW clip-on side guide
-
Lengths: Reference Engineering Section for details
-
Synchronous, Non-Synchronous Free Flow Accumulation
-
Smooth re-start
-
Safe, quiet, economic design.
-
UHMW chain guide (upper & lower) for quiet
equipment operation.
-
45 FPM standard w/ optional fixed speeds from 5-120
FPM.
CHAINS: Steel Roller or
Elector-Conductive series chains.
DRIVES: Center Drive w/ Center
Take-Up & Fixed End Idlers.
ELECTRICAL CONTROLS: Available as an
option
MOTORS: Available through 5 HP in all
NEMA classes.
SPEEDS: 5-120 FPM, constant speed
(specify) Note: HP capacity changes with speed (please reference
engineering section).
SUPPORTS: Multi-tier floor supporting
or ceiling support header channel.
ACCESSORY COMPONENTS: Reference
Accessory and Component Sections for such items as Stoppers,
Diverters, Positioners, Positive Drive Wheels, Lock Devices, Pallet
Exciters, Etc,...
