Industraline Catalog: Rotation & Positioning Equipment: Automatic Lift and Position

DESCRIPTION

The Industraline Automatic Lift and Position handles a wide variety of captive skids, fixtures and pallets. A number of pre-engineered widths are available from 16" to 61" in 1" increments to meet any transfer application. The Automatic Lift and Position model is mounted to the bottom side of Industraline Model conveyors for precision placement along conveyor. This model utilizes two (2) 1" diameter tapered pins to precisely lock fixtures in place when lifting and positioning.


Note: Pin radius and outside radius or width is based on minimum dimensions for rectangular fixtures.

SPECIFICATION

FRAME: 7 GA. steel.

LIFT DEVICE: Industraline Positive-Lift Air Cylinder with 100mm bore x 50mm stroke. 850 lift capacity at 80 PSI.

SENSOR: Sensor to read Positioner up, with down sensor optional.

STOPPER: Reference Stopper Section for selection

HOW TO SPECIFY

NOTE

1. Pinch point exist at lift.

2. Reference Engineering Section for conveyor frame widths.

3. Reference Conveyor model for BF dimension.
   

 Click for Printer Friendly Version