Industraline Catalog: Diverters: MODEL DPB-114L

DESCRIPTION

The Industraline Model DPB-114L Diverter handles a wide variety of captive skids, fixtures and pallets. A number of pre-engineered widths are available from 18" to 61" in 1" increments to meet any transfer application.

SPECIFICATIONS

FRAME:  7 GA. cold drawn steel.

LIFT DEVICE:  Industraline Positive Lift air Cylinders with 100mm bore x 50mm stroke. 950 lbs. lift capacity at 80 PSI. Furnished with double solenoid valve and flow control.

CAPACITY:  500 lbs load capacity.

BEARINGS:  All bearings are precision heavy duty, lubricated for life, ball bearing units with cast iron housings.

MOTOR DRIVE:  1/3 HP, 60cycle TEFC right angle gear motor, available in all voltages. (note: maximum belt pull for 1/3 HP unit is 210 lbs.)

SENSOR:  Sensor to read diverter up, with down sensor optional.

BELTS:  (2) 14mm Timing Belts.

SPEED:  45 FPM, constant.

DRIVE SHAFT:  1 1/4" diameter, located at the discharge end.

HOW TO SPECIFY

NOTES

1. Transition should not exceed 1.3 of conveyed object width.

2. Pinch point exist at diverters.

3. Reference Engineering Section for conveyor frame widths.

4. Reference Conveyor model for BF dimension.

Click for Printer Friendly Version