Industraline Catalog: Diverters: MODEL DPC-254L

DESCRIPTION

The Industraline Model DPC-254L Low Profile Diverter handles a wide variety of captive skids, fixtures and pallets. A number of pre-engineered widths are available from 32" to 61" in 1" increments to meet any transfer application.

SPECIFICATIONS

FRAME:  7 GA. steel.

LIFT DEVICE:  Postive-Lift Slide. 1500 lbs. lift capacity at 80 PSI. Furnished with double solenoid valve and flow control.

CHAIN:  2 1/4" wide Stainless Steel Table Top chain with 320 lbs. per foot dead load.

BEARINGS:  All bearings are precision heavy duty, lubricated for life, ball bearing units with cast iron housings.

MOTOR DRIVE:  3/4 HP, 6 cycle TEFC.

SENSOR:  Sensor to read diverter up, with down sensor optional.

DRIVE CHAIN:  Driver chain #50 Riveted Roller Chain.

SPEED:  45 FPM, constant.

DRIVE SHAFT:  1 15/16" diameter, located at the discharge end.

HOW TO SPECIFY

NOTES

1. Transition should not exceed 1.3 of conveyed object width.

2. Pinch point exist at diverters.

3. Reference Engineering Section for conveyor frame widths.

4. Reference Conveyor model for BF dimension.

Click for Printer Friendly Version